Power Adapters
5
Fresh Air To Go comes with both a 12 volt DC car adapter and a
100 - 240 volt 50/60 Hz AC adapter with interchangeable plugs.
• Insert the car adapter into an
appropriate 12 volt automotive
type power outlet.
• Insert the small adapter plug into
the opening located underneath at
the rear of the unit.
OR
• Select and install the proper international plug
into the AC adapter. Insert correctly assembled
adapter into a standard electrical outlet.
THEN
NOTE: when installing one of the interchangeable
plugs, be sure to snap and lock it into place.
When removing a plug, press the raised tab to
release, then slide the plug out the top.
PRESS HERE
To change the car adapter fuse, unscrew
and remove the front of the adapter.
Replace with the same type and rating only
12VDC Adapter Fuse
Portability
Depending on how it is mounted, your Fresh Air To Go can be
ready to take with you in just a few seconds.
• To remove the unit from an attached
base, press down on the front latch
and slide the unit back, then up
NOTE: If you prefer to remove the base and
unit together, mount the base with velcro or
suction cups to a clean, dry surface.
• Once the unit is assembled and the base mounted,
simply snap the wire stand into the base. The latch
at the front of the base should snap into place,
locking in the stand and unit.
PRESS
SLIDE THEN LIFT
For added convenience, mount extra bases (item
#70142) where you use your Fresh Air To Go most.
See your EcoQuest Dealer for more information.
