ecoObs GSM-BATCORDER 1.0 Скачать руководство пользователя страница 7

Страница: 7 / 55

11.3.2019

GSM BC englische Version 1.0 working copy - Google Docs

https://docs.google.com/document/d/1VKt6uoJvSfEkYLDzHNqqOVF-sEzni9rJ_CeRmnapthk/edit

7/53

OPERATION MANUAL GSM-BATCORDER

Connector for external 12V adaptor
Connect here the AC to 12V wall adaptor. The 12V power supply is provided for

charging the 6V lead acid battery, if connected. It is not considered as a regular

power supply for the GSM-batcorder.

Connector for external battery
Right hand of the microphone plug there is a green three pin plug for the external 6V

battery pack. The connector for the lead-storage-battery at the GSM-batcorder´s top

side is green with a white marking line. Be sure that the markings on plug and

connector do match. To connect the battery to the GSM-batcorder the plug has to

be slid into the connector easily, to separate again only pull the plug straight out of

the connector. Do not twist the connector!

(Any power source up to 14V can be used to run the GSM-batcorder, but only a 6V

lead acid battery will be charged by the 12V AC-adaptor .)

Caution: The battery connector has no reverse polarity

protection. If connected in reverse the GSM-batcorder will be

destroyed immediately.

Connector for microphone
Connect here your microphone disk. Both, the connector and the plug have a red

dot. They must be aligned.The plug is connected to the connector by simply putting

it together. Do not use force or tools to connect. Otherwise you might damage the

plug or the connector.

This is a push-pull connector. Pull the plug at the knurled area to unlock it.

You must not twist it!

Mini USB port
To the left of the SD-memory-card slot there is a mini USB port (USB 2.0). You can

use this port to connect the GSM-batcorder to an external host device (see “ USB

mode ”), to energize the GSM-batcorder or to recharge the 6-Volt-battery pack. For

the charging process a minimum of 500mA power supply is required. The charging

capability is set oﬀ by default. This can be changed in the ‘extended settings’ menu

(see “ Charge battery with USB On/Oﬀ ”).

Содержание GSM-BATCORDER 1.0
























































Результаты поиска

Содержание GSM-BATCORDER 1.0

Отзывы:

Похожие инструкции для GSM-BATCORDER 1.0

Бренды по названию

Популярные бренды

ecoObs GSM-BATCORDER 1.0, Руководство пользователя

Результаты поиска

Содержание GSM-BATCORDER 1.0

Отзывы:

Похожие инструкции для GSM-BATCORDER 1.0

Бренды по названию

Популярные бренды