If only one wireless thermostat is used in the installation, the
default Zone 01 and Home Address 01 can be used. Skip to
Option 03. If multiple wireless thermostats are used, each
thermostat and damper have to be programmed with a unique
Zone number. The first thermostat can use the factory set
Zone 01 and Home Address 01.
Press the
keys to
set the Zone number for the
thermostat from Zone 1 to 8.
Press the
NEXT
key to go to
the next option. Or, press the
ENTER
key to save and exit
UP/DOWN
Option
Zone
CANCEL
NEXT
ENTER
02 Changing the Home Address Number
01 Changing Zone Number
SYSTEM
The Home address is used when two or more installations are
within 300’ of one another. This allows neighbors, different
departments or floors to use the wireless thermostats and not
interfere with each other. Skip to Option 04 if no other user
groups are nearby.
Option
Home
CANCEL
NEXT
ENTER
Press the
keys to
set the Home Address
number for the thermostat
from Home 1 to 8. If multiple
departments are installing
wireless thermostats, each
department should use a
UP/DOWN
SYSTEM
different Home number to insure the Damper in another
department is not inadvertently changed.
Press the
NEXT
key to go to the next option. Or, press the
ENTER
key to save and exit the installer options, or press the
CANCEL
key to exit installer options without saving.
the installer options, or press the
key to exit installer
options without saving.
CANCEL
The difference between the setpoint and room temperature
must exceed the deadband temperature before the thermostat
makes an adjustment to the airflow. If the deadband is set for 1
degree, the room temperature must be more than 1 degree
warmer or cooler than the setpoint temperature before the
damper position is changed
03 Setting Deadband Temperature
Option
CANCEL
NEXT
ENTER
SYSTEM
Press the
keys to
set the Deadband
Temperature. Range is 1 to 5
degrees.
Press the
NEXT
key to go to
the next option. Or, press the
ENTER
key to save and exit
UP/DOWN
the installer options, or press the
key to exit installer
options without saving.
CANCEL
The Update Time Interval
determines how often the
thermostat sends data to the
wireless damper actuator.
Shorter times will use more
battery life and provide faster
response to temperature
04 Set Update Time Interval
Option
CANCEL
NEXT
ENTER
SYSTEM
changes. The default setting of 10 minutes is a good
compromise in battery life and responsiveness.
Press the
keys to set the Update Time from 5 to 30
minutes.
Press the
NEXT
key to go to the next option. Or, press the
ENTER
key to save and exit installer options, or press the
CANCEL
key to exit installer options without saving.
UP/DOWN
Access installer options by pressing and holding the unmarked
key below the System key for seven seconds. The LCD will
display Option 01 for setting the Zone number.
Press or hold the
NEXT
key to advance to the next option.
The LCD will advance to Option 10 and return to Option 01.
Press the
CANCEL
key to exit the option selections. Press the
ENTER
key to save all options.
Press and hold the
unmarked key for seven
seconds to access the
installer options.
Option 01 will be displayed.
Accessing Installer Options
Inside
Mo
Schedule
Day
AM
AUTO
Set To
MENU
HOLD
NEXT
ENTER
SYSTEM
Option
Zone
CANCEL
NEXT
ENTER
6
