Front panel (E-311)
Remote Sensor:
Detects infrared signal from remote control unit.
POWER Indicator:
while the receiver is power on and at standby mode.
Card Slot:
One CA Interface for Conax.
USB A:
USB 2.0 Host, connect to USB hard disk, or flash disk. (On the left side of the receiver)
Display:
(LED type) Indicates operating status of receiver. (Optional)
Rear Panel (E-311)
LNB IN:
This port is to connect the coaxial cable from LNB of your Dish.
AV OUT:
This Scart connector is used to connect TV using Scart cable.
DC 12V:
This is used to connect an external 12V adapter.
HDMI:
Audio and Video output socket for TV set with HDMI Input Jack only.
Ethernet:
(optional) Network port, you can get a new software updates from this port.
USB B:
USB 2.0 Host, connect to USB hard disk, or flash disk.
