07
https://www.altonindustries.com
08
EXPLANATION OF THE SYMBOLS ON
THE EQUIPMENT
Read instruction manual
and safety instructions
before starting up and
pay attention!
Wear safety goggles!
Wear ear-muffs!
Wear work gloves!
Make sure that other
persons maintain a
sufficient safety distance.
Keep uninvolved persons
away from the device.
93
dB
L
WA
Attention! Do not touch
rotating parts.There is a
serious risk of injury!
Attention! Do not touch
rotating parts.There is a
serious risk of injury!
Don't use your device in
moisty weather.
Risk of catapulted parts
if the engine is running.
Be sure to keep a safe
distance.
Protection class ll
Switch off and unplug
the device before
cleaning or performing
maintenance on it.
Attention! Power cord
can be pulled in.Keep
the power cord away
from the cutting roll-ers.
Guaranteed sound
power level
1. INTRODUCTION
Dear Customer,
we hope your new tool brings you much
enjoymentand success.
Note:
According to the applicable product liability
laws, the manufacturer of the device does not
assume liability for damages to the product or
damages caused by the product that occurs
due to:
Improper handling,
Non-compliance of the operating
instructions,
Repairs by third parties, not by authorized
service technicians,
lnstallation and replacement of non-
original spare parts,
Application other than specified,
A breakdown of the electrical system that
occurs due to the non-compliance of the
electric regu-lations and VDE regulations
0100，
DIN 57113 / VDE0113.
WE RECOMMEND:
Read through the complete text in the
operating in-structions before installing and
commissioning the device.
The operating instructions are intended to
help the user to become familiar with the
machine and take advantage of its application
possibilities in accord-ance with the
recommendations.
The operating instructions contain important
infor-mation on how to operate the machine
safely, pro-fessionally and economically, how
to avoid danger, costly repairs, reduce
downtimes and how to in-crease reliability
and service life of the machine.
In addition to the safety regulations in the
operating instructions, you have to meet the
applicable regula-tions that apply for the
operation of the machine in your country.
Keep the operating instructions package with
the machine at all times and store it in a
plastic cover to protect it from dirt and
moisture.
Read the instruction manual each time
before oper-ating the machine and carefully
follow its information. The machine can only
be operated by persons who were instructed
concerning the operation of the ma-chine
and who are informed about the associated
dangers. The minimum age requirement
must be complied with.
ln addition to the safety notices contained in
this operating manual and the particular
instructions for your country, the generally
recognised technical reg-ulations for the
operation of identical devices must be
complied with.
We cannot accept any liability for damage or
acci-dents which arise due to a failure to
follow these in-structions and the safety
instructions.
2. DEVICE DESCRIPTION
Handle
Power cord
Frame tubing
lower bar
Machine frame
Blade roller
Wheel
wheel cap
Carriage bolt
Wing nut (plactic)
Cable clip
Safety release catch
On / Off switch
Wheel suspension
washer (pre-assembled)
Split pin (pre-assembled)
Lock pin
Screw M8
Nut M8
Drive shaft
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
