Ecom UNO, Руководство по эксплуатации

Страница: 8 / 12

8
Number Value Function Factory Setting
0 0 – 1 1 = Set to Factory Setting 0
1 0 – 90 Automatic Switch-off 15
2 1 – 9 Display Damping 3
3 0 – 1 1 = with Zero Correction 1
Setup
Settings can be made in the setup menu. To do this, press the ON/OFF key
for about 3 seconds after switching on the unit.
The following functions can be set:
• Select a function with the ON/OFF key.
• Setting is made with the HOLD and the setting key.
• Press and hold the ON/OFF key for about 3 seconds to exit the setup
menu.
Change Batteries
NOTICE
The two 1.5 V AA batteries must be replaced when the battery
capacity indicator flashes.
1. Open the lid of the battery compartment.
2. Remove used batteries.
3. Replace batteries with new batteries.
4. Slide the cover onto the battery compartment.