Ecom SHL 200-Ex, Руководство по эксплуатации

Страница: 41 / 48

Maintenance and repair
4 1
Portable Lamp
S HL 200-Ex
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
For fast processing, have the following information ready:
• Type and serial number
• Purchase information
• Error description
• Intended use (in particular input / output wiring)
9.6.1 LED voltage errors
Troubleshooting
• Open the portable lamp (see chapter "Battery replacement").
• Disconnect and then reconnect battery.
• Close the portable lamp.
• Insert portable lamp into charging unit.
• Charge battery.
10 Maintenance and repair
10.1 Maintenance
• Consult the relevant national regulations to determine the type and extent of
inspections.
• Adapt inspection intervals to the operating conditions.
red green green green green Description
LED input voltage too high
LED input voltage too low
WARNING
Danger when used in hazardous areas!
The explosion protection is impaired!
• Open the portable lamp in safe areas only.
WARNING
Unauthorized work being performed on the device!
Risk of injuries and material damage!
• Work performed on the device must only be carried out by appropriately
authorized and trained personnel.
Observe the relevant national regulations in the country of use.