Ecom Ident-Ex 01, Руководство по эксплуатации

Страница: 16 / 28

16
While the transfer is running, the yellow LED of the battery indicator will blink
until the transfer is finished or a failure occurs.
If the transfer was successful, the green LED of the battery indicator will go on
shortly.
The firmware will now be started.
If a failure occurs during the transfer, the firmware can’t be started and we will
stay in the Bootloader (a chaser light in the battery indicator goes from red, to
yellow, to green).
In this case the firmware hast to be installed again (see point Installation of new
firmware ). A new Bluetooth connection has to be set up, if the connection is lost
while installing a new firmware (the SPP and Bluetooth LED are not on)
Installation of new firmware of the Ident-Ex (with a mobile device)
Bluetooth pairing of Ident-Ex and the mobile device
To install new firmware on the Ident-Ex with a mobile device, at first a Bluetooth
connection between the mobile device and the Ident-Ex hast o be set up.
The Bluetooth connection can be set up through the entity “Settings” by pressing
the button “connect”.
SPP