Ecom Ident-Ex 01, Руководство по эксплуатации

Страница: 14 / 28

14
If the transfer was successful, the green light of the battery indicator will blink
shortly.
The new firmware now starts and the Bootloader will leave.
If a failure occurs during the transfer, the firmware can’t be started and we will
stay in the Bootloader (a chaser light in the battery indicator goes from red, to
yellow, to green).
In this case the firmware hast to be installed (see point Installation of new
firmware) .
A new Bluetooth connection has to be set up, if the connection is lost while
installing a new firmware (the SPP and Bluetooth LED are not on)
By sending the symbol string “BOOT”
The second possibility of installing new firmware for the Ident-Ex is to send the
symbol string „Boot“, before data is send through the HyperTerminal. Therefore,
only „Boot“ has to be typed in the HyperTerminal. The red LED on the battery
indicator will start blinking on the Ident-Ex which means, that the Ident-Ex
requests data from the computer.
SPP