Page 10
ECOM-D
7. Input/ Selection of measurement data
To view data already recorded or to create a new file, the following op-
tions are available:
Create new (is automatically selected the first
time an MM card is used):
When creating a new
file, a number should be assigned to it.
Select
<Create new>
and confirm with
<Enter>
. In-
put a number designation for this file (max. 16 fig-
ures) using the keyboard:
- Use the arrow keys
<Up/Down/Right/Left>
to select
the character (selected character is outlined by a black background)
- Press
<Enter>
to confirm the character selection (press
<F2>
to de-
lete the last character if needed)
- Repeat this procedure until the desired number is complete.
Example:
"25.09.2009"
Tip:
We suggest a date-related file number to easily find the data file
later on via the search function.
After confirming with
<F1>,
it is possible to enter a text via the key-
board (max. 6 lines with 20 characters each) which is printed out and
can be used for data processing purposes. Proceed as follows:
- Select text line 1 using the arrow keys
<Up/Down>
and
confirm with
<Enter>
- Select the keyboard mode with
<F3>
(4 keyboard modes
are available)
- Select with the desired character with
<Up/Down/Right/Left>
(se-
lected character is outlined by a black background)
- Press
<Enter>
to confirm the character (press
<F2>
to delete the
last character)
- Repeat this procedure until the desired text is complete.
Selection upon:
Search word
Memory number
Create new
Quit with: ESC
Содержание ECOM-D
Страница 1: ...Operating Instructions Version 2 0 1 ...
