15
8.1.3 Connecting the set
Insert the connecting plug into the accessory socket on the radio unit.
Only now should you switch on the radio unit. The headset is always set to the
receive mode.
To transmit a message press the round PTT button; the radio unit now swit-
ches from receive to transmit. After transmitting your message release the
PTT button. The radio unit once again reverts to the receive mode.
8.1.4 Windscreen
To change, remove the windscreen from the microphone and carefully attach
the new windscreen.
8.1.5 Care
Wipe the headband, earpiece, and goose neck arm every now and then using
a soft cloth moistened with just water. When cleaning do not use any alcohol,
cleaning agent or detergent.
CAUTION:
Check the receiving volume every time before using the headset; adjust if
necessary. Signals that are too loud can permanently damage your hearing.
8.2 Ex-TRA Neckband Headset
8.2.1 Wearing method and microphone adjustment
Put on the headset, brush your hair away from your ear. Then adjust the
neckband so that it rests comfortably against your head. The neckband head-
set is equipped with an NC microphone. This suppresses unwanted ambient
noise and ensures speech is transmitted clearly. A precise adjustment of the
microphone is required in order to achieve optimum noise suppression. The
microphone capsule at the outer end of the goose neck arm should be located
approx. 1 cm from the corner of your mouth.
