Ecom Instruments Ex-Time 40, Руководство по эксплуатации

Страница: 7 / 15

17
7.3 Wall Mounting
An integral metal bracket located on the rear of the clock enables the
Ex-Time 40 / Ex-Time 50 to be suitably mounted on an appropriate
wall. The fixing of the unit must be secure at all times and precautiona-
ry measures must be taken to prevent the Ex-Time 40 / 50 from falling
into an area classified as zone 0.
7.4 Time Setting
The white adjusting wheel on the quartz mechanism is used to make
any necessary time adjustments.
8. Repairs
Repair work is subject to the nationally valid regulations and directives.
We therefore recommend that such work be performed by ecom
instruments GmbH, Germany, as all repairs must be examined to ensu-
re functional safety.
9. Disposal
Old electrical devices as well as „historical“ old electrical devices from
ecom instruments GmbH are supplied for disposal at our expense and
disposed of free of charge in accordance with European Directive
2002/96/EC and the German electrical law of 16/03/2005. The costs asso-
ciated with returning devices to ecom instruments GmbH are to be borne
by the sender.
10. Cleaning, Maintenance and Storage
- The entire back face of the unit must only be cleaned with a damp
cloth
- Do not use solvents or abrasive cleaning agents to clean the unit.
- The batteries should be taken out of the unit if it is to be out of use
for a length of time.
- The storage temperature should be within the permitted range of
0°C to +50°C.