Ecolab Nalco Water STORM, Инструкция по установке, эксплуатации и обслуживанию

Страница: 25 / 33

STORM ™ - SETTLING RATE MONITOR
INSTALLATION, OPERATION & MAINTENANCE MANUAL
ESTDS-STORM-IOM - REV K
Page 23 of 31
Step 4: Disconnect Camlock Step5: Remove Wing nuts
Settling Cylinder Replacement
Step 6: Position Settling Cylinder
Step 4: Replace and tighten wing nuts.
Step 5: Reconnect sample hose camlock ensuring O-ring is located inside female connection.
Step 3: Replace and tighten top PVC union – ensure O-ring is located in union.
Step 2: Reconnect level sensor coupling
WARNING: Failure to properly connect this coupling may cause Settling Cylinder to
overfill and permanently damage vacuum generator.
Step 1: Reconnect air and water push-fit connections into the top of the Settling Cylinder.