5
6. Timer setting
a. Setting timer to turn on the heater.
When the heater is in “stand-by” mode (unit is plugged in but not operating),
press TIMER button to get your desired turn on time. which you want to the
heater is turned on . the “2H” icon will be displayed on the control panel to indicate
that the heater will turn on after 2 hours . Press the timer button repeatedly to
automatically turn on the heater at any desired hour set in a sequence of 2-4-6-8-10.
The timer is adjustable up to 10 hours with a step rate of 2 hours.
b. Setting the timer to turn off the heater.
Press the timer button once when the heater is in operation. The “2H” icon will be
displayed on the control panel to indicate that the heater will turn off within 2
hours . Press the timer button repeatedly to automatically turn off the heater
with a selected number of hours in a sequence of 2-4-6-8-10. The timer is
adjustable up to 10 hours with a step rate of 2 hours.
Timer will be canceled if you press the TIMER button when it is set to the
maximum hour.
USING THE REMOTE CONTROL
SAFTEY FEATURES
There are 6 keys that have the following functions:
1. Press to switch the heater on, press again to switch off
2. Press this key to select the heat setting
3. :Timer increase
CAUTION : Please dispose or recycle the battery according to municipal
or provincial laws.
4. :Timer decrease
5. Temperature increase
6. Temperature decrease
The heater is equipped with an over-heat device which cause the unit to stop
operating in the event that the internal temperature exceeds the normal operating
temperature.
If the heater shuts down,
1. Turn off and unplug the heater.
