4
SAFETY TIPS
Position on a flat, stable surface.
A service agent/qualified technician should carry out installation and any repairs if required. Do not
remove any components or service panels on this product.
Consult Local and National Standards to comply with
The following:
o
Health and Safety at Work Legislation
o
BS EN Codes of Practice
o
Fire Precautions
o
IEE Wiring Regulations
o
Building Regulations
DO NOT use jet/pressure washers to clean the appliance.
DO NOT use the appliance outside.
DO NOT use this appliance to store medical supplies.
DO NOT use electrical appliances inside the appliance. (e.g. heaters, ice-cream makers etc.)
DO NOT stand or support yourself on the base, drawers or doors.
DO NOT allow oil or fat to come into contact with the plastic components or door seal. Clean
immediately if contact occurs.
Bottles that contain a high percentage of alcohol must be sealed and placed vertically in the
refrigerator.
Always carry, store and handle the appliance in a vertical position and move by holding the base of the
appliance.
Always switch off and disconnect the power supply to the unit before cleaning.
Keep all packing away from children. Dispose of the packaging in accordance with the regulations of
local authorities.
If the power cord is damaged, it must be replaced by an agent or a recommended qualified technician
in order to avoid a hazard.
INTRODUCTION
Please take a few moments to carefully read through this manual. Correct maintenance and operation of this
machine will provide the best possible performance from your product.
PACK CONTENTS
The following is included
：
Refrigerator or Freezer
Shelves 1 per door
Shelf guides 2 per door
Keys x2
Instruction manual
We pride ourselves on quality and service, ensuring that at the time of packing the contents are supplied fully
functional and free of damage. Should you find any damage as a result of transit, please contact your dealer
immediately.
INSTALLATION
Note: If the unit has not been stored or move in an upright position, let it stand upright for approximately 12
hours before operation. If in doubt allow to stand.
1.
Remove the appliance from the packaging. Make sure that all protective plastic film and coatings
are thoroughly removed from all surfaces.
2.
Maintain a distance of 20 cm (7 inches) between the unit and walls or other objects for ventilation
increase this distance if the obstacle is a heat source.
Note: Before using the appliance for the first time, clean the shelves and interior with soapy water.
3.
Set the brakes on the castors to keep the appliance in position OR level the appliance by adjusting the
screw feet.
