Cleaning & Storage
Reminder of Replacing Filter
In the condition of working, when the device detects the filter is saturated after running for
2200 hours, the light ring will keep flashing in red. Long press the Wind Speed Button for 7s
to stop flashing light and to reset after installing a new filter.
UV-Light Button
·
When the machine is on, each time you touch the "UV-light button", the light
will switch between soft - standard - off cycle.
·
When the device is powered on, press the UV-light button for 3 seconds, the UV lamp will
be turned on, press the UV-light button for 3 seconds again, the UV lamp will be turned off.
Timer
·
In the condition of working, press the Timer Button to set timer among the circulation of 2H, 4H
and 8H. Every time you press the button, the buzzer rings for one time, and the corresponding
indicator will be on.
·
In the status of timing, the device begins to count down. When the time is up, the air purifier will
stop working.
MAINTENANCE
When the filter button flashing red light, it is indicated that the filter needs to be replaced. Please
use only the filter specially designed for this product.
Notice:
·
Clean the filter regularly. Do not wash with water or reuse the filter.
·
Ensure the device is unplugged before replacing the filter.
·
Please sterilize the filter under sunlight regularly.
·
Do not use a vacuum cleaner to clean the filter or wash it directly.
Notice:
·
Ensure the machine is unplugged before maintenance.
·
Do not immerse the air purifier into water or any liquid.
·
Do not use abrasive, corrosive or flammable cleansers (such as bleach or alcohol) to clean any
part of the unit.
·
Do not wash or reuse the filter.
·
Do not use a vacuum cleaner to clean the filter or wash it directly
54
55
