ECOFOREST Eco I Insert, Руководство пользователя

Страница: 58 / 164

57
5.9. INTERNET CONNECTION (EASYNET).
If there is internet availability in the machine emplacement the access and control of the machine is possible
through internet. Check availability.
FIRST FOR ALL, PLEASE READ SECTION 5.9.1 , 5.9.2 AND 5.9.4.
A WRONG CONFIGURATION COULD BLOCK THE WiFi CONNECTION WITH THE MACHINE.
CONSULT YOUR DEALER.
5.9.1. RECOMMENDATIONS.
• Make the connection with the machine switched off.
• If the device is used to connect to different Ecoforest machines, delete browser history and cache or make a
private connection from the browser.
•
Clarify with customer the connection type between stove / boiler and router. Despite the convenience of the
wireless connection, for safety and reliability reasons, Ecoforest TS (Technical service) recommends cable
(Ethernet) connection whenever possible. Depending on the connection to be made:
• WiFi: Check that there is good coverage between the stove and your domestic router.
If the WiFi device we are going to use to carry out the configuration is within the reach of other WiFi
networks to which it can self-connect, we recommend deleting said networks temporarily (until the
configuration has completed successfully).
• Ethernet: Connect a direct ethernet cable (T568A) between CPU and router.
5.9.2. CONFIGURATION.

Drop-down selection.

WiFi name

WiFi password

Current WiFi IP

Current Ethernet IP

‘Test’ button.

‘Save’ button.
Drawing 49
Drop-down menu:
AP-WiFi Original : Factory settings. The CPU generates its own WiFi network, SSID. Text boxes (

) and (

) are
automatically filled with the SSID and PWD of the CPU.
LAN WiFi: Synchronizes the CPU with the external WiFi. Text boxes (

) and (

) are filled with the name of the
wireless network of the facility and the WiFi password.
LAN-Ethernet: The CPU will communicate via the Ethernet protocol.
AP-WiFi Personalized: The CPU will create its own WiFi network, SSID. The text boxes (

) and (

) must be filled
in according to the SSID and password desired by the user. The SSID must contain a minimum of 4 characters and
the password a minimum of 8. Spaces and strange characters must be avoided