ECOFOREST Atenas, Руководство по установке и обслуживанию

Страница: 41 / 124

40
WHAT DO TO IF...
THE STOVE REMAINS OUT OF POWER:
6.4. Make sure the stove is connected and the plug is leading power.
6.5. Make sure the cable is not damage or cut.
While the stove is disconnected, dismantle the right door of the stove and check if any lead of the C.P.U. is
slack.
6.6. Check the CPU pilot. If it is OFF, check also the fuse on the CPU.
PELLETS DO NOT FALL AND THE STOVE DOES NOT TURN ON:
6.7. Check if there are pellets in the hopper.
6.8. Make sure the glass door is closed.
6.9. Make sure the gas outlet tube is not obstructed by anything (e.g. bird nest, plastic, etc.).
6.10. Make sure the exhaust motor works, because if it does not work fuel will not fall.
6.11. If the reducer motor does not rotate and the displays indicate the pulses, the first thing to do will be unplug
the stove and verify if the security thermostat has been activated.
With the stove unplugged , check that the
security thermostat is located inside the stove. To activate it, you must press the button. If the thermostat is
activated you will hear a “click”. In the insert models Eco I and Eco II (
drawing 30 ), it is situated in the frontal
part, under the keyboard. You must unscrew the stopper which protects it.
Drawing 29 Drawing 30
6.12. If the reducer motor receives current and rotate slower than usually, it may have something blocked such as
a screw, a piece of wood, etc. To solve this problem, you must empty the hopper and, even if necessary, to
remove the auger screen (contact with technical support).
6.13. If when the reducer motor rotates makes a noisy is due to a lack of lubrication, you have to lubricate only the
auger screen, not the reducer motor, see point
5.15 .
PELLETS FALL BUT THE STOVE DOES NOT TURN ON:
6.14. Make sure the glass door is well closed.
6.15. Make sure the hollowed basket is correctly placed, that it is in contact with the resistance tube and the
central hole of the basket goes along with this tube.