ECOFER UVC09/UVC12/UVC18/UVC24 User manual
2
Electrical safety
Grounding:
This room air conditioner must be grounded. Grounding reduces the risk of electric shock by providing an
escape wire for the electric current. If the power cord has a grounding plug with a grounding wire, plug it
into an outlet that is properly installed and grounded. If the power cord has not a grounding plug with a
grounding wire, the grounding wire must connect the breaker that is properly installed and grounded.
Warning
: Improper use of the grounding plug or breaker can result in a risk of electric shock. Call a qualified electrician
if you don’t understand the grounding instruct
ions or if you are not sure if the air conditioner is properly grounded. If
the wall outlet or breaker is not grounded, please contact an electrician to have it replaced with a properly grounded
outlet or breaker.
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
Adapter plug: We strongly advise against using an adapter plug or breaker.
Operating conditions
1. Temperature: T1 instance: -7
℃
~43
℃
(16
℃
~43
℃
in cooling-only type)
T3 instance: -7
℃
~52
℃
(16
℃
~52
℃
in cooling-only type)
If the unit runs beyond the temperature for a long time, it may cause cooling capacity to decrease or protector to
work.
2. Relative humidity: <80%
If the unit runs beyond the humidity range, condensate may be formed near blade and outlet of
air conditioner. It’ s
normal.
3. In heating operation, strange smell may come from the unit. It is Normal phenomenon.
4. The performance parameters refer to name plate.
5. The waterproof level of indoor unit is IPX0. Do not use it in the laundry or bathroom.
6. The outdoor unit can’ t be installed i
n a closed area.
7. Fuse:50T T3.15AL250V or F3.15AL250V, rated current:3.15A.
Tips
•
Install the unit on the north side, as normally that is the shaded side. This will enhance the operation of your
unit.
•
Use correct electric voltage and proper ampere for the unit to run effectively.
•
Only let a certified electrician do any modifications to your electrical outlet or breaker.
•
Use a dedicated line for the operation of your air conditioner to avoid the possibility of an electrical surge.
•
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
•
The dimensions of the space necessary for correct installation of the appliance including the minimum
permissible distances to adjacent structures.
•
The appliance shall be installed in accordance with national wiring regulations.
•
Disconnect the power supply before cleaning and maintenance.
•
If the appliance is not connected by plug
，
an all-pole disconnection device which has at least 3mm separation
distance in all pole and a residual current device (RCD) with the rating of above 10mA shall be incorporated in
the fixed wiring according to the national rule.
•
If the appliance is connected by plug
，
it must be positioned so that the plug is accessible.
Содержание UVC09
Страница 20: ...ECOFER UVC09 UVC12 UVC18 UVC24 User manual 18...
