ecodyst EcoChyll X1, Руководство по эксплуатации, Страница: 62 / 69

56
Accelerating the path to discovery
®
Temperature display offset needed.
To enter a controller display offset:
1. Turn on controller. Allow unit to warm up
for 30 minutes.
2. Record displayed temperature.
3. Press both the  and

keys on the front
of the temperature meter until “ tunE ”
appears, then let go of the keys.
4. Press the

key until “ LEV L” appears.
5. First hold in the “ * ” key, then while
holding in the “ * ” key press the

key
until “ 3 ” is showing in the display, then let
go of all keys.
6. Press the

key until “ ZEro ” is showing in
the display.
7. Note the current display offset (this is the
number blinking in the display).
8. Calculate the new offset temperature
using the equation:
New Current
Display = display
offset - Dis Correct
Offset blinking in
display temperature temperature
9. First hold in the “ * ” key, then while
holding in the “ * ” key press the

or

keys until the new offset temperature is
showing, then let go of all the keys.
10. Press the

and

keys until the
temperature is displayed.
Problem Cause Corrective Action
High Powered Heating Mantle Controllers