Ecodhome MyVirtuoso Home Скачать руководство пользователя страница 6

Страница: 6 / 125

Safety Information

Before using this equipment, precautions need to be taken to reduce any
fire risk or personal injury:

Read the instructions carefully and follow the precautions in this
manual. All mains connections must be carried out by a trained
and qualified person.

Pay particular attention to all potential hazards posed by devices
marked (or indicated in the manual) with the

symbol.

Disconnect any device from mains / mains chargers before
cleaning. Clean devices with a damp cloth, do not use
detergents.

Do not use devices in gas-filled environments.

Do not place the gateway near heat sources.

Only use original accessories provided by EcoDHOME
/SmartDHOME.

Do not place cables and/or power supplies under heavy objects.
Also, avoid routes near sharp or abrasive objects and walkways.

Keep out of reach of children.

Do not carry out any maintenance on the device, instead contact
your supplier.

10.

Contact your supplier if one or more of the following occurs to
the gateway or an accessory (included or optional):

If the product has come into contact with water or any

other liquid.

If the product has suffered obvious damage to the casing.

If the product does not perform conforming to its stated

characteristics.

Содержание MyVirtuoso Home






























































































































Результаты поиска

Содержание MyVirtuoso Home

Отзывы:

Похожие инструкции для MyVirtuoso Home

Бренды по названию

Популярные бренды

Ecodhome MyVirtuoso Home, Руководство пользователя

Результаты поиска

Содержание MyVirtuoso Home

Отзывы:

Похожие инструкции для MyVirtuoso Home

Бренды по названию

Популярные бренды