20
(I) Wall mounting
1.
Place mounting bracket over the desired location
on the wall. Through the 2 screw holes of the
bracket, mark the mounting surface with a pencil
(Fig.2).
2.
Where marked, drill holes into mounting surface
using an appropriate size drill bit and insert the
plastic rawl plugs.
3.
Screw mounting bracket onto the mounting sur-
face. Ensure that the screws are flush with the
bracket (Fig.3).
4. Snap the Temp./Humid. sensor into place on the
mounting bracket.
5.
Secure with the fixing screw supplied.
Fig.2
Fig.3
