Ecodhome 01335-1450-00, Руководство по установке

Страница: 12 / 17

11
Introduction
Thanks for choosing the SmartDhome socket switch
and power meter for pairing with the home automa-
tion gateway.This module is a Z-Wave enabled device
and is fully compatible with any Z-Wave enabled
network. Every mains powered Z-Wave enabled device
acts as a signal repeater and multiple devices result
in more possible transmission routes, which helps
eliminate “RF dead-spots”
This socket will switch on/off the appliance that is at -
tached to this module, by receiving Z-Wave signal from
controller or manual switch.
This plug-in on/off module is able to detect cur -
rent wattage and overload wattage of connected
non-dimmable lights or appliances. When detecting
overload state, the socket will be disabled and its On/
Off button will be locked; the LED will flash quickly
for 30 seconds. Unplug and re-connect the socket to
reset its overload condition to normal status.
This module also acts as repeater.