Ecodhome 01335-1450-00, Руководство по установке

Страница: 15 / 17

14
Operation
When power is first applied, the LED flashes on and off
alternately and repeatedly at 2-second intervals. This
means that it has not been assigned and cannot work
with Z-Wave enabled devices. However, pressing the
on/off button will directly control the on/off status of
the connected load without using the wireless control-
ler.
When overload state occurs, the module is disabled
and LED flashes on and off alternately for 30 seconds
at 0.1 second intervals. Overload state can be cleared
by unplugging and reconnecting the module to the wall
socket.
Troubleshooting
Symptom Cause of Failure Recommendation
The module is not
working and LED off.
1. The module
is not plugged into
the electrical outlet
properly.
2. The module is
broken.
1. Check power
connections.
2. Do not attempt
repair, contact sup-
plier.