Ecodan EHPT15X-UKHDW1S Скачать руководство пользователя страница 52

Страница: 52 / 52

ENVIRONMENTAL INFORMATION

Products are manufactured from many recyclable materials. At the end of their useful life they should be disposed of at a

Local Authority Recycling Centre in order to realise the full environmental benefits.

Insulation is by means of an approved CFC/HCFC free polyurethane foam with an ozone depletion factor of zero.

WEEE Declaration

Disposal of Waste Equipment by Users in Private Household in the European Union.

This symbol on the product indicates that this product must not be disposed of with your other household waste.

Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point

for the recycling of waste electrical equipment.

The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural

resources and ensure that it is recycled in a manner that protects human health and the environment.

For more information about where you can drop off your waste equipment for recycling, please contact your local city

office, your household waste disposal service or the company where this product was purchased.

Residential Heating & Ventilation Telephone: 01707 278666

MELSmart Customer Services & Support: 0161 866 6089

Option 1 - Air Conditioning Technical

Option 4 - Heating Technical

Option 2 - Spares

Option 5 - Returns

Option 3 - Warranty

Option 6 - Product Training & Site Services

Email:

[email protected]

Website:

les.mitsubishielectric.co.uk

UNITED KINGDOM

Mitsubishi Electric Europe B.V. UK Branch

Living Environmental Systems Division

Travellers Lane

Hatfield

Hertfordshire

AL10 8XB

General Enquiries

Telephone: 01707 282880

Fax: 01707 278881

7797271-01 (01/22)

TECHNICAL SUPPORT

Additional Requirements for using R32 Refrigerant

1. Important Notice (Fire safety)

R32 is flammable refrigerant (classified as A2L - lower flammability), and the fire safety warranty for the whole system

(including outdoor unit) must be done by your side.

Conformity of regulations (e.g. IEC 60335) and laws must be confirmed on the system by your side.

2. Pressure relief valve

PUZ-(H)WM(50/60/85/112/140)(V/Y)(H/A)A outdoor units contain a 0.3 (3.0) MPa (bar) pressure relief valve.

Do not attach an additional pressure relief valve to the heating (cooling) circuit on EHPT(15/17/21/25/30)X-UKH(L)

DW1(S-L).

LOCAL APPLICATION FACTORS

Содержание EHPT15X-UKHDW1S





















































Результаты поиска

Содержание EHPT15X-UKHDW1S

Отзывы:

Похожие инструкции для EHPT15X-UKHDW1S

Бренды по названию

Популярные бренды

Ecodan EHPT15X-UKHDW1S, Руководство по установке

Результаты поиска

Содержание EHPT15X-UKHDW1S

Отзывы:

Похожие инструкции для EHPT15X-UKHDW1S

Бренды по названию

Популярные бренды