Warm air heaters EBA, EBC, EBV
1.13 Thermostat
The thermostat is required for the heater. Alternatively, you can use a programmable thermostat.
Features:
1.
Switching on and off.
2.
Setting the temperature in the room.
3.
Resetting the heater.
Note: Be sure that the device was connected exactly as in the diagram. Make sure that the cables phase /
neutral are connected correctly, because the heater and the controller may be damaged.
NOTE! The thermostat must be located at a distance of about 1.5 m above the floor and away from
drafts and where it is not exposed to direct sunlight or heat sources (such as sunlight or warm air
generated by the heaters). As far as possible it should not be installed on the exterior walls.
Technical data
Powe:
230 V ± 10%, 50 Hz
The adjustment range:
6 - 30
°
C
Temperature range:
0
°
C - + 50
°
C
IP:
IP20
Color:
Biały
Dimensions:
75x75x34 mm
Weight:
95 g
17
ECO CALORIA Sp. z o.o.
27-200 Starachowice, ul. Zgodna 2
Tel.: +48 41 274 14 41 fax: +48 41 273 71 47 [email protected] www.ecocaloria.com
