© 2019 EcoAir 6 All rights reserved
5.
Remove the Plastic Nut and the Spinner Nut from the shaft. Note, to loosen the Spinner Nut
turn clockwise.
6.
Fit Rear Grill onto the Shaft, ensure location lugs are all lined up (Fig1) before tightening up
the plastic nut. To tighten the plastic nut rotate clockwise.
7.
Insert the Blade into the Shaft ensuring Blade groove is locked into the locating Shaft Pin
(Fig2) then tighten with the Spinner Nut. To tighten the Spinner Nut rotate anti
-
clockwise.
8.
Secure the Front Grill to Rear Grill (the circlip has a locating lug). Fix the top first ensuring the
top lug (Fig3) is behind the outer ring of the rear grill. Secure the circlip all the way round the
grill and then lock into place with the grill clip.
Tilt Adjustment.
To adjust the air flow upward or downward, manually move the motor via the
motor handle gently to the desired direction.
Height adjustment.
To adjust the height, loosen the fastening knob, with your other hand lift or
lower the inner tube using the motor handle. Tighten the fastening knob when the desired height
is achieved.
Assembly Instruction
-
Fan Head
Fig1
Fig3
Fig2
