Eco SR TS-51 B, Инструкция по сборке

Страница: 9 / 10

Assembly for active leaves on the left is described below. For active leaves on the right, please proceed accordingly.
Attach drilling template and choose corresponding drill holes depending on mounting situation (direct mounting,
mounting with standard profile or mounting with adaptor plate). Drill holes.
Screw on standard profiles (optional), shorten if necessary .Screw on door closer mounting plates .
Mount active leaf slide rail and passive leaf slide rail directly.
Direct mounting
Mounting with standard profile
Mounting with adaptor plate
Screw on door closer mounting plates.
1
2
Screw on adaptor plate (optional), shorten if necessary .Screw on door closer mounting plates .
1
2
Direct mounting
Mounting with standard profile
Mounting with adaptor plate
Mount active leaf slide rail and passive leaf slide rail onto standard profile.
Mount active leaf slide rail and passive leaf slide rail onto adaptor plate.
Connect lever arms to door closer . Fit door closer .
Close closing speed valve . Guide the lever arm in the direction of the slide rail and connect to the slide rai .
Open speed valves. Close doors.
Set closing force.
1 2
1
2
3
Set closing speed.
Set latching speed.
Set back check.
Determine dimension x in line with drawing . Cut connecting rod to length in line with said dimension
x + 28 mm and trim .
Push coupling sleeves as depicted onto the connecting rod . Turn the connecting rod by 90° .Push connecting
rod between the rod ends . Push the coupling sleeves over the rod ends and tighten grub screws . Attention:
the screws of the coupling sleeves have to point downwards.
1
2
1
2
3
4
1b
2a
3
4
5
6
7
8
9
10
11
12
13
14
1a
1c
2b
2c
Determine dimension y acc. to drawing . Cut to length the U-cover profile to dimension y - 8mm and deburr the
cover profile .
Attach cover profile to mounting profile , adjust it and fix it .
Functionality test SR
Open both doors approx. 60°, active leaf has to remain open. Passive leaf closes. Active leaf is only allowed to
close if the passive leaf reaches a closing angle of approx. 30°.
Attach nylon clips . Clip on U-Cover and pinion cover .
Clip on covers for drill holes in slide rail.
1
2
1 2
1 2
3
9/10