0548-991-41---50e_2019.10.indd
ETS 73
0548-991/42e
Page 21 of 26
Operator manual
6 TROUBLESHOOTING
6.1
With D-BEDIX / KOMBI-D-BEDIX (option)
6.1.1
Error display
The control unit recognizes various error situations and conditions and displays them on the
D-BEDIX / KOMBI-D-BEDIX panel by means of an error number. Fatal errors (door in standstill) will
be automatically shown on the display when the installation is switched on.
6.1.2
Carrying out a Reset
Before carrying out a Reset, make sure to note the error number.
• Upon selection and confirmation by means of the OK key, the drive mechanism automatically
re-adjusts itself.
Should you not succeed in eliminating the error, please call the after-sales service (Adress: see
chapter 1).
Note:
In order to perform a precise error diagnostic, the after-sales service absolutely needs
to know the error-no. which is displayed! Hereafter you will find further instructions
about how you can try to eliminate the error, or if it is necessary to contact the after-
sales service.
