Eco ECO CP-404, Руководство пользователя, Страница: 6 / 16

Submersible water pump
6
CAUTION!
Monitor the pump continuously when pumping out to the residual water level and avoid the pump
running dry. Take the pump out of service when the residual water level is reached by pulling out the
mains plug.
The float switch must be operated manually to pump to the residual water level:
1. Remove the mains plug from the plug socket.
2. Lay the float switch up and fix it in position.
3. Insert the mains plug into the plug socket. The pump switches on and starts to feed.
If the water drops below the residual water level, (under 10/40 mm), the pump will draw air in. In this
case, the pump must be vented when the water level rises and before using it again.
MAINTENANCE AND CARE
Cleaning the pump
After conveying chlorine-containing swimming pool water or fluids that leave a residue, the pump
must be flushed out with clear water.
Clean the suction slots on the suction foot if necessary with clear water.
STORAGE
In the event of a risk of frost, the system must be drained completely.
DISPOSAL
Do not dispose of old equipment, batteries or accumulators as household waste!
Product, packaging, and accessories were made with recyclable materials, and should be
disposed of accordingly.
WARRANTY
If any material or manufacturing defects are found during the statutory customer protection period, we will
either repair or replace the equipment, whichever we consider the more appropriate. This statutory period
may vary according to the legislation in force in the country where the equipment was purchased.
Our warranty is valid only if:
■ The equipment has been used properly
■ The operating instructions have been followed
■ Genuine replacement parts have been used
The warranty is no longer valid if:
■ The equipment has been tampered with
■ Technical modifications have been made
■ The equipment was not used for its intended
The following are not covered by warranty: