Attention! vertically up to put the fixture, the shortest safe distance between the
fixtures must be≥900 mm,the installation layout diagram as shown in the picture.
To prevent the reflection and interference of receiving the control signals, we must
install a terminal plug at the end of each branch of 3pin or 5pin output socket. Terminal plug
(welding a 0.25W
,
120
Ω
resistor between the 2 and 3 pin of 3pin or 5 pin socket.
6.4 CABLE CONNECTION
Attention! Signal wires connection is the X type connection.
X connection - if the fixture external cables damaged, the wires should use the manufacturer or
its service agent offered.
Connect the DMX data: from the controller to the nearest controller equipment 3pin or 5pin
socket, and then from this equipment output connected to the next equipment input, like this
continuous connecting, finally the output of the terminal equipment for the data cable insert a
terminal plug.
If use DMX512 distributor, the controller connect to the DMX512 distributor’s input firstly,
then connect the next equipment from the output of the distributor, according to this method,
Finally match the terminal plug.
7.
AC power
..
7.1
VOLTAGE, FUSE SPECIFICATION
Input Voltage
Fuse
200-240V
5A 5×20
(
Main fuse
)
100-120V
10A 5×20
(
Main fuse
)
7.2
Power Connection
The equipment must be operated by professionals; Make sure that the voltage of
Содержание LM1915
Страница 1: ...Wash 19x15 Content ...