Eco Stage LM1915, Руководство пользователя

Страница: 10 / 17

power supply must be comply with the voltage identified on the lamp, and must have an
overload or leakage electrical protection.
ATTENTION!
The equipment directly connected to the power supply, Don't connect to the silicon box color
system, otherwise it will damage the equipment.Factory has equipped the standard 3 pin plug
socket. Connect the power supply as below table. Yellow and green wire could be connect to
ground. If the cable of the fixture is damaged, replacement should be operate by factory or qualified
staff.
Wire Colour Plug Mark
Brown Live wire L
Blue Null N
Green Ground wire
8. CONTROL PANEL MENU OPERATE
1: The indicating arrow in the right below is enter the menu (click the menu).
2: The touch screen display have four operation key: Exit, Upward, Downward, Enter, press it will
execute orders accordingly.
3: Can change the parameter Settings directly on the touch screen.
4: Also can use the wheel on the left side of touch screen to change the parameter Settings.
5: Can use the built-in battery by the left button of touch screen, change the parameter
Settings.When using the built-in battery for power supply, the green Indicator lights up.
6: The equipment have built-in temperature sensor, the temperature will display on the bottom left
corner of touch screen. When over the rated temperature, the equipment will start the automatic
protection function.
7: When the equipment receive the DMX512 signal,the blue light on the top right lights up, the
left side show have connected the XLR Socket..
CONTROL PANEL MENU OPERATE
Address
DMX Address number set
001-512
Transfer Rate 029
Data 506
Signal quality 100%
Start Code 000
Fixed ID set 0-4096
Return
Special
White Balance
Off
Open
White Balance Red (0-100%)0-255
White Balance Green (0-100%)0-255