ECO Spot
TM
LEDB90 / B150 User Manual
Copyright © 2015 Sunhope Inc
dba thegobo.com
Page
2
of
4
Handling Instructions
•
Before the initial start-up, please unpack and carefully check for damage caused during
transportation.
•
Place your fixture at a suitable place with good air flow.
•
Make sure there are no flammable materials close to the lamp.
•
When suspending the fixture above ground level, verify that the structure can hold at least
10 times the weight of all installed devices.
•
Verify that all external covers and rigging hardware are securely fastened and use an
approved means of secondary attachment such as a safety cable.
Warranty
One Year from Date of Purchase
Focusing
•
Power up the projector by pressing the larger switch in the back.
•
Turn on the gobo rotator with the smaller switch in the back and switch it off when the
gobo projects in the desired position.
•
Focus the projection by twisting the lens in and out until the image is well focused. When
used for the first time, the lens will often need to be twisted outwards many rotations to
reach the focusing point.
Projection Lenses
The projector accommodates interchangeable projection lenses to allow optimizing the
projection size and resulting brightness at varying distances.
The more narrow the lens, the smaller and brighter the image will be at a given distance.
Gobo Rotator
•
Turn on and off the gobo rotator with the rotation control button on the back plate
•
There are no controls for rotating speed or direction.
Multi-functional Yoke
•
The yoke can slide over the whole length of the fixture body to accommodate multiple
pointing directions.
•
The yoke acts as a stand foot.
•
The yoke can be screwed to a wall or ceiling or fastened with a C-clamp.
