background image

ECO Spot LED B90E/B150E/B300E User Manual 

 

  

  Page 2 

 

Copyright  © 2015 Globus New Media 

LLC 

 

Page 2 

 

Outdoor Use 

The projector and external driver are designed for outdoor use. The rear, perforated 

cooling part of the projector including the fan is rated for water exposure. To extend the 

projector life, an external hood can be placed above the projector but this measure is not  

mandatory. 

Handling Instructions 

Warranty 

One Year from Date of Purchase. Keep your receipt for reference and contact your dealer 

in case of warranty issues. 

Projection Lenses 

The projector accommodates interchangeable projection lenses to allow optimizing the 

projection size and resulting brightness at varying distances. The more narrow the lens, 

the smaller and brighter the image will be at a given distance.  

Focusing 

Gobo Rotator  

If the fixture is equipped with a gobo rotator, it can be turned on/off with the silver push-

button on the front plate underneath the lens. There are no controls for rotating speed or 

direction. Even when not used, the gobo rotator comes handy for straightening the gobo 

image after a gobo was installed.  

 

 

 

Before the initial start-up, please unpack and carefully check for damage caused 

during transportation. 

 

When suspending the fixture above ground level, verify that the structure can hold 

at least 10 times the weight of all installed devices.  

 

Verify that all external covers and rigging hardware are securely fastened and use 

an approved means of secondary attachment such as a safety cable. 

 

Power up the projector. 

 

If the fixture is equipped with a gobo rotator, turn it on and then off again once 

the gobo projects in the desired position.  

 

Loosen the outer ring around the lens that acts as a water seal.   

 

Focus the projection by twisting the lens in and out until the image is well focused. 

When used for the first time, the lens will often need to be twisted outwards many 

rotations to reach the focusing point. When in doubt, keep going. 

 

Re-tighten the outer ring with the seal to ensure the lens won’t leak water. 

Содержание LED B90E

Страница 1: ...ply both overload and ground fault protection Do not use the fixture if the power cable or power plug is in any way damaged defective or wet or if they show signs of overheating The fixtures have power plugs for testing and for indoor use but exterior installations usually require hard wired connections Follow all related codes ECO Spot LED B90E B150E B300E Exterior User Manual Place your fixture ...

Страница 2: ...the front plate underneath the lens There are no controls for rotating speed or direction Even when not used the gobo rotator comes handy for straightening the gobo image after a gobo was installed Before the initial start up please unpack and carefully check for damage caused during transportation When suspending the fixture above ground level verify that the structure can hold at least 10 times ...

Страница 3: ...gh this is a LED projector the gobo gets hot please wait a few minutes for the gobo to cool down if the projector was on Unscrew the thumbscrews to remove the front cover with the projection lens Keep the rubber seals and re use them with the thumb screws to prevent leakage Push the two pins of the gobo retaining ring together and pull out the retaining ring Carefully remove the old gobo and repla...

Страница 4: ...13lbs 6kg B300E 17lbs 7 7kg Gobo Dimensions Metal or Glass Gobos and Dichroic filters Standard Gobo Size M Size Outer Diameter OD 66mm Image Diameter ID 48mm Max Thickness 4mm LED Lamp Rated Bulb life 40 000h Color Temperature 6 000k 500k Rated luminous flux B90E 7 500lm B150E 12 000lm B300E 20 000 Effective luminous flux B90E 6 200lm B150E 8 900lm B300E 11 500lm CRI 75 Lens Options The projector ...

Отзывы: