12
Attention:
Deviating from the European standard EN 1082-1: 1996 which requires a coloured
marking, the size marking of the
ecomesh
®
safety gloves may also be affixed on a pla-
que in the wristband area as an international size, or in English language (see table above).
Size Selection
The correct size must not be too small, because the ring fabric is not elastic. When the hand
is open, therefore, the material must protrude on the finger, which is required for unhinde-
red movement.
Die Depending on the requirements of the hazard analysis at the workplace, more extensive
protective measures may be required. The
ecomesh
®
gloves are therefore available
with rings made of ring fabric in a length of 8, 15, 19 and 21 cm and for work that requires
protection of the entire arm to the armpit, arm protection gloves are also available.
If other body parts must be protected against cuts or puncture wounds, it is necessary to wear
additional personal protective equipment.
Model
ecomesh
®
„E”, „D”, „DC” and „M”
Especially when working with electrically or pneumatically operated knives
(EN14328:2005), the glove must not be too big, otherwise there is a risk that
the ring tissue may get caught by the movable machine parts.
Adjusting the Gloves
ecomesh
®
„T”
safety gloves can only be worn on the designated hand. The gloves
are factory delivered to be worn on the left hand.
For right hand, the addition 'Right' must
be specified when ordering.
ecomesh
®
„E”, „D”, „DC” and „M”
safety gloves can be worn either on the right
or on the left hand. The gloves are delivered for left hand wear; the gloves can be easily tur-
ned for wearing on the right hand.
Turn from left to right hand wear:
1. Turn the glove inside out.
Only for stab wound protection gloves with cuff:
2. Pull the wristband out through the slot.
3. If necessary, bend the waveband reinforcements straight.
English
Adjusting the band:
ecomesh
®
„T”
safety gloves have a polypropylene textile wristband strap that is
adjustable in length but not interchangeable. The glove is factory delivered for right-handed
use, i.e. to be worn on the left hand.
For right hand, the addition 'Right' must be specified when ordering.
The length of the wristband can be adjusted with the press stud. Overhanging wristband
strap can be easily shortened, ideal length: 25 mm. The end of the tape should be sealed
