3
TIMER OFF Button:
Press this button to initiate the auto-off time
sequence. Each pressing will increase the auto-timed setting in
30 minutes increments. When the setting time displays 10:00,
each pressing will increase the auto-timed setting 60 minutes
increments. To cancel the auto-timed program, simply adjust the
auto-off time to 0:00
12
1
2
5
4
6
4
3
Indicators on Display Panel
Display Panel
TRANSMI-
SSION Indicator
OPERATION
MODE Indicator
LOCK Indicator
TIMER
DISPLAY Indicator
DIGITAL
DISPLAY area
ON/OFF Indicator
FAN SPEED Indicator
TIMER ON OFF
DIGITAL DISPLAY area:
This area will show the set temperature
and, if in the TIMER mode, will show the ON and OFF settings of
the TIMER. If in the FAN mode, nothing is appeared.
TRANSMISSION Indicator:
This indicator flashes once
when remote controller transmits a signal to the indoor unit.
Fig. 2
1
2
LOCK Button:
When you press the recessed LOCK button, all
current settings are locked in and the remote controller does not
accept any operation except the settings locked in before the
LOCK button is pressed. Press again to cancel the LOCK mode.
13
4
TIMER DISPLAY Indicator:
This display area shows the settings
of the TIMER. That is, if only the starting time of operation is set,
it will display the TIMER ON. If only the turning off time of operation
is set, it will display the TIMER OFF. If both operations are set,
it will show TIMER ON-OFF which indicates you have chosen
to set both the starting time and off time.
6
FAN SPEED Indicator:
Press the FAN SPEED button to select
the desired fan speed setting (Auto-Low-Med-High). Your selection
will be displayed in the LCD window except the Auto fan speed.
7
Operating the Remote Controller
The Remote Controller requires two alkaline dry batteries
.
1.
To install the batteries, slide the back cover of the battery
compartment and install the batteries according the
direction (+and -)shown on the Remote Controller.
Install/Replace Batteries
NOTE:
All signs shown in the Fig.2 are for illustration purposes
only. During the actual operation only the relative
functional signs are shown on the display panel.
!
LOCK Indicator:
LOCK display is displayed by pressing the LOCK
button. Press the LOCK button to clear display.
OPERATION MODE Indicator:
When pressing the MODE button,
it shows the current operating mode -- AUTO
COOL
DRY
HEAT
mode.
5
4
ON/OFF Indicator:
This symbol appears when the unit is turned
on by the remote controller, and disappear when the unit is
turned off.
3
1. When replacing batteries, do not use old batteries or a different
type of battery. This may cause the remote control
to malfunction.
2. If you do not use the remote controller for several weeks
remove the batteries. Otherwise battery leakage may damage
the remote controller.
3. The average battery life under normal use is about 6 months.
4. Replace the batteries when there is no answering beep from the
indoor unit or if the Transmission Indicator light fails to light.
NOTE
TURBO Button:
Push this button on COOL mode, the air con-
ditioner goes into powerful cooling operation. Push again to
cancel the TURBO function(Not availabe for the air conditioner
without TURBO function).
14
OPERATION
MODE Indicator
7
