OPERATING TEMPERATURE
MANUAL OPERATION
Manul operation can be used temporarily in case you can not find the remote controller or
test running purpose or maintenance necessary.
To achieve optimal performance, please note the following:
Adjust the air flow direction correctly so that it is not directed on people.
Adjust the temperature to achieve the highest comfort level. Do not adjust the unit to
excessive temperature levels.
Close doors and windows on COOL or HEAT modes, or performance may be reduced.
Use TIMER ON button on the remote controller to select a time you want to start your
air conditioner.
OPTIMAL OPERATION
5
Manual control
button
Panel
AUTO/COOL
Open and lift the front panel up to an angle until
it remains fixed with a clicking sound.
One press of the manual control button will lead
to the forced AUTO operation.
Close the panel firmly to its original position.
CAUTION:
1
3
2
Mode
Cooling operation
Heating operation Drying operation
Temperature
1. If air conditioner is used outside of the above conditions, certain safety protection features may
come into operation and cause the unit to function abnormally.
2. Room relative humidity less than 80%. If the air conditioner operates in excess of this figure, the
surface of the air conditioner may attract condensation. Please sets the vertical air flow louver to its
maximum angle (vertically to the floor), and set HIGH fan mode.
3. Optimum performance will be achieved within these operating temperature.
Room temperature
Outdoor temperature
17 C ~ 32 C
18 C
43 C
~
0 C
30 C
-7 C 24 C
~
~
17 C
32 C
~
11 C 43 C
~
Push the button to initiate forced AUTO
mode, push again to stop. If push the
button twice within five seconds, the unit
will operate in forced COOL mode.
This function is used for testing purposes
only. Do not choose it unless it is necessary.
To restore the remote controller operation,
use the remote controller directly.