
50
display. Press ENT and the format of the messages for that analyzer will be sent to the
Configuration Tool.
Each analyzer’s serial number will appear in the “Device:” window list (open window to see
all present) after its message format has been received by the Configuration Tool. When an
analyzer’s serial number is in the “Device:” window, its data will appear at the bottom of the
Configuration Tool’s screen.
After the last analyzer on the CAN bus has sent its message format to the Configuration Tool,
that list of analyzers can be saved using “Save List” and later recalled using “Load List”.
This saves having to resend message formats to the Configuration Tool next time the tool is
used.
A .dbc file for all analyzers in the “Device:” window list is produced by pressing “Generate
.dbc”.
Real-Time Display
When an analyzer’s serial number is in the “Device:” window, its data will appear at the
bottom of the Configuration Tool’s screen.
Logging Data
Analyzers whose serial numbers are in the “Device:” window list can be data logged. Press
the “Log Data” button and follow the instructions. Data is saved in .csv format.
Содержание NOx 5210 Series
