Eclipse Shoprider 778S, Инструкция по эксплуатации

Страница: 20 / 23

20
Trouble Shooting
If your scooter will not start:
Make sure that the key switch is turned on? If it is, the battery condition gauge will be operating.
If the battery condition gauge fails to operate when the key switch is in the “on” position,
check the following:
Make sure the battery charger is not plugged into the wall outlet. This will prevent drive.
If your scooter does not slow down, or the variable speed control does not work:
Turn off the power ”on” key switch.
Inform your authorized Shoprider dealer.
CAUTION : If you find for any reason that your scooter doesn’t reduce speed when you let go of the
forward-reverse throttle, switch your scooter “off” with the on/off key. The parking brake will activate
immediately and stop your scooter. Be aware that the scooter will stop very suddenly, so brace
yourself with the handlebars; sit back on your seat.
If you feel for any reason that your scooter is not driving correctly, or is making an unusual noise,
stop using the scooter. Be
SAFE , Contact your Shoprider dealer, who will be able to advise you.
GENERAL DESCRIPTION : The scooter controller system incorporates a sophisticated
microprocessor design. It is located under the cover of your scooter. The scooter controller
continually monitors the scooter system, and ensures safe and reliable operation.
SAFETY CONDITIONS MONITORED INCLUDE
•
Speed control system integrity
•
Internal voltages and circuits
•
Motor voltages and circuits
•
Safety isolate relay
•
Battery voltage
To ensure safety, the controller will not operate if the speed thumb lever (throttle) is not in the
neutral position.