Eclipse EC-P50, Руководство пользователя

Страница: 38 / 48

38 P0016-LU-03.01
Away Arm
To away arm your alarm system from a remote location, please proceed as follows:
1. Access your alarm system as described in the “Remote Access” section.
2. After the main menu has finished playing, enter
*1#
on your touch-tone phone. The
system will prompt:
“Exit started.”
3. The main menu is prompted:
“System armed, press 0 to disarm, press * to hear again.”
4. To end the remote access session, enter
*99#
on your touch-tone phone.
Stay Arm
To stay arm your alarm system from a remote location, please proceed as follows:
1. Access your alarm system as described in the “Remote Access” section.
2. After the main menu has finished playing, enter
*2#
on your touch-tone phone. The
system will prompt:
“Exit started.”
3. The main menu is prompted:
“System stay armed, press 0 to disarm, press * to hear again.”
4. To end the remote access session, enter
*99#
on your touch-tone phone.
Disarm
To disarm your alarm system from a remote location, please proceed as follows:
1. Access your alarm system as described in the “Remote Access” section.
2. After the main menu has finished playing, enter
*0#
on your touch-tone phone. The
system will prompt:
“System Disarmed.”
3. The main menu is prompted:
“Press 1 to arm, press 2 to stay arm, press * to hear again.”
4. To end the remote access session, enter
*99#
on your touch-tone phone.
Turn Remote Controlled Outputs On and Off
The EC-P50 security system has 5 remote controlled outputs that can be switched on and
off when the system is remotely accessed via a touch-tone telephone. Your installer will
normally connect one or more of the remote controlled outputs to control lighting etc.
To turn on or off the remote controlled outputs from a remote location, please proceed as
follows:
1. Access your alarm system as described in the “Remote Access” section.