Eclipse EC-P50, Руководство пользователя

Страница: 12 / 48

12 P0016-LU-03.01
Disarming the System
When the system or area is away armed, you must enter the protected area via the
designated entry route (normally the front door). On entering the premises the entry timer
and entry tone starts and you must enter a valid access code before the entry timer expires.
To disarm your alarm system during normal entry, please proceed as follows:
EP
Enter Passcode:.2...
19:45 28/04/2011
Enter your access code .
????
An Alarm Company
19:46 28/04/2011
--
The entry tone stops and the area is
now disarmed.
Enter the protected area by the designated
entry door.
The entry tone will sound.
Armed on
Armed off
Reset after an Alarm
After an alarm has occurred in a protected area, the display will indicate the source of the
alarm on disarming the area. The alarm indication will remain on the display until the alarm
condition has been reset.
To reset the system after an alarm, please proceed as follows:
04
Zone 04 Alarm
Cash Office
Enter your access code
to reset the alarm.
????
then
press
R
The entry tone stops and the area is
now disarmed.
Follow steps 1 and 2 for disarming the system.
Armed off
Alarm on