manualshive.com logo in svg

Eclipse CD8454, Руководство пользователя

Поделиться
Скачать
Eclipse CD8454 Скачать руководство пользователя страница 73

73

How to operate the MP3/WMA player

Listening to MP3/WMA file

Press the [DISC] button to switch to the CD player mode.

1

This starts MP3/WMA file play.
Disc mode from CD player 

➔

Memory Stick player in order

each time the button is pressed.
If an external CD changer is connected, each additional press
of the [DISC] button will switch modes from CD changer 1 

➔

CD changer 2 

➔

Memory Stick player 

➔ 

CD player.

A changer or player with no discs loaded will be skipped. 

•Playback may be intermittent when there is a scratch on a CD

or when the recorded side is dirty.

•Only two external CD changers may be connected.

Caution

Note 

•When music data recorded in the normal way (CD-DA) is

present on the same disc with MP3/WMA music files, the
normally recorded music data will be played. To listen to the
MP3/WMA music files, press button [3] for more than one
second.

•When a not corresponding for MP3/WMA file is played, "NO

SUPPORT" will appear.

[DISC] button

Button [3] 

Содержание CD8454





















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды