manualshive.com logo in svg

Eclipse CD8454, Руководство пользователя

Поделиться
Скачать
Eclipse CD8454 Скачать руководство пользователя страница 44

44

Basic operation

Adjusts treble level. Treble mode can be adjusted for each
source (CDP/CDC, FM and AM).
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right:  Emphasizes high sounds.
Turn to the left:

Softens high sounds.

TREB (TREBLE) Mode

Adjusts left/right speaker balance.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right:  Emphasizes right speakers.
Turn to the left:

Emphasizes left speakers.

BAL (BALANCE) Mode

Adjusts front/rear speaker balance.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right:  Emphasizes front speakers.
Turn to the left:

Emphasizes rear speakers.

FAD (FADER) Mode

Adjusts non-fader level (for connected sub-woofers, etc.).
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right:  Increases level.
Turn to the left:

Decreases level.

NON-F (NON-FADER) Mode

[AUDIO CONTROL] button

Содержание CD8454





















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды