Eclipse CD5444 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 152

Eclipse CD5444 Скачать руководство пользователя страница 44

44

Basic operation

Adjusts left/right speaker balance.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes right speakers.
Turn to the left:

Emphasizes left speakers.

BAL (BALANCE) Mode

Adjusts front/rear speaker balance.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes front speakers.
Turn to the left:

Emphasizes rear speakers.

FAD (FADER) Mode

Adjusts non-fader level (for connected sub-woofers, etc.).
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Increases level.
Turn to the left:

Decreases level.

NON-F (NON-FADER) Mode

Adjusts treble level. Treble mode can be adjusted for each
source (CDP/CDC, Memory Stick, FM and AM).
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes high sounds.
Turn to the left:

Softens high sounds.

TREB (TREBLE) Mode

[AUDIO CONTROL] button

«
...
42
43
44
45
46
...
»

Содержание CD5444

























































































































































Отзывы:

Нет отзывов