background image

  12 / 16

Wind Abeam

Sails: Expand both at an 

angle of 45° at port side

Rudder: In center position

Quarter Lee

Sails: Expand both sails 

at a greater angle

Rudder: Turn to the left

Starboard Tack-Running

Sails: Expand both sails 

at  max.  angle  at  both 

sides

Rudder: In center position

Port Tack-Running

Sails: Expand both sails 

at  max.  angle  at  both 

sides

Rudder: In center position

Quarter Lee

Sails: Pull back both sails 

at starboard side

Rudder

: In center position

Luff Up

Sails: Pull back both sails 

gradually

Rudder: Turn to the left

Wind Abeam

Sails: Expand both at a angle 

of 45° at starboard side

Rudder: In center position

Luff Up

Sails: Pull back both sails gradually

Rudder: Turn to the left

Port Tack

Sails

Keep pulling back 

both sails 

Rudder:  Keep  turning 

to center position if the 

sails stop flapping

Tack

Sails: Keep pulling back 

both sails 

Rudder: Turn to the left

Tack
Sails:  Keep  pulling  back 
both sails 
Rudder: Turn to the right

Tack

Sails:  Keep  pulling 

back both sails 

Rudder: Turn to the left

Bearing Away

Sails: Expand both sails 

keeping them from flapping

Rudder: Turn to the left

Starboard Tack

Sails: Keep pulling back 

both sails 

Rudder:  Keep  turning 

to center position if the 

sails stop flapping

45°

Sailing Instructions

IMPORTANT NOTICE: 

1. Never sail in running water such as streams or rivers, as it is easy to lose control. 

2. Never swim after a stalled or stuck boat. Wait patiently for the wind currents to run the boat again so 

that you can return it to a location where it's easier to retrieve. 

3. After running, remove the hatch to allow the interior of the boat to completely dry. Neglecting to take 

this step, could result in the corrosion of the electronic components.

RC sailing presents a more interesting set of challenges than power boating.  Sailing requires a constant 

reaction to water movement and wind conditions. These reactions require adjustments to both the rudder 

and sails in order to find the best possible setting for speed and course. There is no substitute for actual 

“on-the-water” experience, so after a couple of sailings you may want to read through the manual again 

as you gain a better understanding of the art of sailing.  As you learn, it's a good idea to become familiar 

with sailing terminology which will make it easier to understand the concepts required to become an expert 

captain.  Please study the chart below to understand how wind affects the sailboat and how to set your 

sails and rudder to best use the wind to navigate your course. 

-

Содержание 650

















Отзывы: