Eclipse 550, Руководство по обслуживанию

Страница: 4 / 10

(c) Carefully lift the passenger mask (3) , along with its lanyard cord, out of the one
mask oxygen container. If the passenger mask (3) is going to be reused, do not
uncoil the tubing or remove the mask bag from the mask facepiece.
(d) Repeat for the other mask as required.
SUBTASK AMM-35-20-13-001-011-002
(Refer to Fig. 402 .)
WARNING: OBEY OXYGEN SYSTEM SAFETY PRECAUTIONS WHEN WORK IS
DONE ON OR NEAR OXYGEN SYSTEM AND OXYGEN COMPONENTS.
OBEY THESE INSTRUCTIONS OR INJURY TO PERSONNEL AND OR
DAMAGE TO EQUIPMENT CAN OCCUR.
A. Remove single mask (3) as follows:
(1) Remove oxygen mask decorative panel from single mask auto-deployment assembly
within the Instrument Panel Right (IPR).
(2) Insert the manual release tool (PN 995000) pin or equivalent into the manual release
hole in the lid. Hold the tool perpendicular to the surface of the lid, and push down on
the tool to release the latch. Lift the lid and remove it from the single mask container.
NOTE: The lid is spring loaded and will pop open when the manual release has been
actuated.
(3) Remove the passenger mask (3) from the single mask oxygen container as follows:
(a) Using a flat-blade screwdriver, detach the passenger mask oxygen supply tube
from the valve by unscrewing the threaded mask tubing fitting (1) that is in the
end of the supply tubing.
(b) Remove the lanyard pin (2) from the valve.
(c) Carefully lift the passenger mask (3) , along with its lanyard cord, out of the one
mask oxygen container. If the passenger mask (3) is going to be reused, do not
uncoil the tubing or remove the mask bag from the mask facepiece.
Eclipse 550 Aircraft Maintenance Manual — 06-123838
Temporary Revision No. 35-1
EFFECTIVITY: ALL
35-20-13
Page 402-Rem
Dec 16/19
© 2019 Eclipse Aerospace, Inc.