background image

4

Eclipse Magnetics. Innovative Magnetic Solutions

Eclipse Magnetics. Innovative Magnetic Solutions

2.2  Important Safety Information

ALWAYS

•  Instruct new operators to read the handbook before using the Ultralift E Lifting Magnet
•  Follow the instructions
•  Use the entire pole area
•  Fully engage the lifter in the “ON” position before lifting the load
•  Wear suitable protective work-wear when using this equipment
•  Maintain the pole feet in a good condition
•  Check the suitability of equipment used in conjunction with the lifter 

NEVER

 

•  Lift or transport people
•  Lift loads while people are within the manoeuvring space
•  Allow untrained personnel to operate the lifter
•  Leave a load unattended
•  Use the lifter outside the recommended operations
•  Attempt to switch the lifter before setting down the load  
•  Position yourself beneath the lifted load
•  Allow the load to sway
•  Bring the load to a sharp and immediate stop
•  Lift a load outside the capacity (WLL) of the lifter
•  Lift a load with dimensions outside those recommended within this manual
•  Alter the attitude of the load from horizontal to vertical
•  Lift an unbalanced load
•  Operate the lifter in temperatures higher than 40°C (104°F) and lower than -10°C (14°F)
•  Operate the lifter in humidity higher than 80%
•  Operate the lifter in explosive (EX) or static sensitive environment 
•  Submerse the lifter in water
  

Содержание Ultralift E ULE0100















Отзывы: