manualshive.com logo in svg

EcLine EC-PM-530D Series, Руководство пользователя, Страница: 13 / 82

Поделиться
Скачать
EcLine EC-PM-530D Series Скачать руководство пользователя страница 13

EC-PM-530D User's Manual 

- 6 - 

 
 

 
 
 

2.4 Connecting the Power Cord 

1. Make sure the printer is turned off. (The pressed down side on the power switch with O mark 

denotes the printer is off). 

2. Make sure the voltage of the electrical outlet matches that of the AC adapter. 

3. Plug the AC adapter to printer's power supply inlet. 

4. Plug one end of the power cord into the AC adapter, and then plug the other end of the power cord 

into a properly grounded electrical outlet. 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 

2.5 Installing the Ribbon Cartridge 

1. Make sure the printer is turned off. 

 
 
 
 
 

2. Open the rear cover firstly, and then pull the projections on both sides of the front cover upwards 

to open the front cover forcibly. 

3. Take out the ribbon cartridge, and then turn the ribbon knob in the direction shown by the arrow to 

tighten the ribbon. 

4. Insert one side of the ribbon cartridge with the ribbon knob on the right, and then press down 

another side until the ribbon is locked in place. 

5. Turn the ribbon knob in the direction shown by the arrow again to tighten the ribbon. 

6. Close the rear cover and front cover and the installation is finished. 

Figure 2-7 Connecting the power cord

 

Note: Don’t replace the ribbon cartridge when the power is on, or else,

 

the printer may 

start to work suddenly and you may get hurt.

 

Note: The detailed information of the network settings, please refer to the 

User’s Manual

.

 

Warning:

 

1. If the rated voltage and your outlet voltage do not match, do not plug the power 

cord to electrical outlet, and contact your dealer for assistance.

 

2. Please use the electrical outlet connecting the ground properly.

 

3. Please use the original AC adapter only. Manufacturers have no responsibilities 

for the problems which are led by using unauthorized AC adapter.

 

Power Supply Inlet 

AC Adapter 

Power Cord 

Power Switch

 

Содержание EC-PM-530D Series



















































































Отзывы:

Нет отзывов