Ecleris C100HD Скачать руководство пользователя страница 4

USER MANUAL

– C100HD 

 

Page 

4

 of 

18

 

INMANUUIN165 Rev.2019.04.01 / ENG 

  The  device  is  not  apt  to  be  used  in  presence  of  an  inflammable  anesthetic  mix  with  air, 

oxygen or nitrous oxide 

Be careful when moving the head up and down, since there is risk to trap the hand or 
the  fingers  between  the  device’s  arm  and  the  head’s  base.  Take  the  handwheel  to 
regulate the head’s height with one hand and keep the forearm firm with the other hand 
in a safe position, away from the area with risk to smashing the fingers. 

 

  Do not look straight to the light output, since the head has a very brilliant light output. 

  While  moving  the  device  (during  the  installation  and  when  the  device  is  positioned  for 

performing a study) check that the light is off so as to avoid illuminating the face straightly. 

  Do not use the device during electrical storms. 

  Do  not  introduce  objects  into  the  orifices  and  do  not  place  containers  with  fluids  on  the 

device. 

  Disconnect the power supply cable from the outlet when the device is not in use. 

  In case of interference with other electro medical or electrical devices with a low immunity 

level,  it  is  recommended  to  increase  the  distance  between  the  device  and  the  interfered 
devices so as to reduce those effects. 

  Do  not  open  the  device.  Maintenance  and  repairs  should  be  made  by  ECLERIS  or  by  a 

Company authorized by same. ECLERIS shall not be liable for the consequence of repairs 
of maintenance performed by unauthorized persons. 

  This instructions manual should stay near the device for future consult. 

 

If, the consequence of: 

  The inappropriate use of the device, 

  Not using the instructions manual, 

  Misuse or inappropriate maintenance of the device, 

  Repairs or manipulation performed by unauthorized staff,  

  Continuing using the device in case of malfunction or unstable performance,  

Содержание C100HD



















Отзывы: