Ecleree AWAK SB115i, Инструкция по эксплуатации

Страница: 4 / 20

4
1. IMPORTANT REMARK
Congratulations! You are the owner of a carefully designed and manufactured
equipment. We thank you for trusting in us and choosing our AWAK Series loudspeaker
cabinets.
In order to get the optimum operation and efficiency from this unit, it is VERY
IMPORTANT - before you plug anything - to read this manual very carefully and bear in mind all
considerations specified within it. We strongly recommend that its maintenance be carried out
by our Authorised Technical services.
2. WARNINGS
No user serviceable parts exist inside these units.
Never use this unit in the proximity of water. Do not expose the unit to water
splashing, nor place liquid containers on top of it.
Avoid placing the unit next to heat sources such as spotlights or heaters.
Use only the accessories specified by the manufacturer. The units must never be
flown from their transportation handles. Use the correct accessories for each application.
3. INTRODUCTION
These acoustic enclosures have been designed to offer a wide range of applications:
Starting with conference rooms where superior intelligibility is required or outdoor installations
like mobile discos. These situations require an excellent sound projection, large sound pressure
and operating safety. All models employ bass-reflex type acoustic enclosures and have been
optimised using the acoustic design software SIMBOX.
High density wood fibres have been used in the fabrication process. All models
feature a 1mm thick perforated grating and acoustically transparent foam, effectively protecting
the unit from splashings and dust. The LC-type passive filters inside the AWAK series make use
of low tolerance polyester capacitors and large section coils. All units feature an effective
protection system on the high frequency way against Larsen effect and signal clipping. The
connection plates are equipped with speak-on connectors.
4. MODELS
AWAK108i
Employs an 8'' high performance bass driver capable of holding up to large cone
displacements. This 8'' driver is firmly mounted on a steel chassis and features a powerful
ceramic magnet and a 37 mm coil. A neodymium tweeter provides the high frequencies.
AWAK208i
Employs two 8” high performance bass driver with polypropylene membrane, capable
of holding up to large cone displacements. This 8” driver is firmly mounted on a steel chassis
and features a powerful ceramic magnet and a 52 mm coil. The high frequency way uses 1”
high efficiency compression driver coupled to a 90ºx60º rotatable horn (See diagram).